Driver Footpeg Mounts?

Scootworks · Posted: October 6, 2009, 11:25 pm Post subject: Driver Footpeg Mounts?

Howdy,

This is Dave from Scootworks in NC. We're rebuilding a XS650 for a customer here, and he wanted Kuryakyn footpegs. Kury doesn't manufacture a peg adapter for their pegs to fit the XS-650. While I'm sure some of you may have modified mounts for this application, we designed a peg adapter and manufactured them in our CNC shop for the XS-650 to allow direct fitment of Kuryakyn and similar pegs to this bike.

Is there any interest from XS-650 owners for such a part? I wanted to get a feel for any interest before I had the guys make a batch.

Thanks,
Dave
support @ scootworks . com

Joseph · Full Member Joined: May 22, 2007 Posts: 767 Location: NY

Would thes go on the location of the stock driver peg? Do you have a pic of one instaled? I don't see how they go.
Doess anyone have aftermarket pegs mounted with pics? I dont see how the repacements are instaled.
www.jcwhitney.com/FOLD...002578;0;0 How would you intall something like this to the driver peg bracket? I am curious I don't plan on purchgasing these I do like the Kuryakan better.

Scootworks · Posted: October 7, 2009, 12:51 pm Post subject: Re: Driver Footpeg Mounts?

Joseph wrote:

Would thes go on the location of the stock driver peg? Do you have a pic of one instaled?

Yep, they fit into the location of the stock driver peg, and allow for the installation of Kuryakyn or Scootworks pegs. The painter is buffing out the paint in our paint shop this evening, I'll snap a pic of the assembly as installed on the bike and post it here when he's finished.

Dave

Srinath · Posted: October 7, 2009, 3:31 pm Post subject: Re: Driver Footpeg Mounts?

Hi Dave,
I have an off topic question.
You guys used to make 20-21mm width pulleys that fit vulcan 800's and marauders right.
I'd like to buy a pulley that runs a 14mm belt but is 4.25" or so diameter with the vulcan/marauder spline. If not, an 8mm belt with that diameter should work.
For years I have been trying to get over there from charlotte and have yet to make it.
Thanks.
Cool.
Srinath.

Scootworks · Posted: October 8, 2009, 7:40 am Post subject: Re: Driver Footpeg Mounts?

Srinath wrote:

Hi Dave,
I have an off topic question.
You guys used to make 20-21mm width pulleys that fit vulcan 800's and marauders right.
I'd like to buy a pulley that runs a 14mm belt but is 4.25" or so diameter with the vulcan/marauder spline. If not, an 8mm belt with that diameter should work.
For years I have been trying to get over there from charlotte and have yet to make it.
Thanks.
Cool.
Srinath.

orning,

I probably already have something like you need on the shelf, as we manufacture that in 14mm now, and still have some old 8mm stock. Shoot me a note at support @ scootworks . com and let's talk.

Dave

Srinath · Posted: October 8, 2009, 12:13 pm Post subject: Re: Driver Footpeg Mounts?

Soreee no emailee from workeee ... something about Billions of dollars stolen from banks via email ... yea ... But blogs, websites, forums (plural of forum is Fora FWIW) and porn are all safe from theft apparently. Shocked

Anyway, 14mm is fine too but it has to be under 4 1/4-4 1/2 dia and have the marauder/vulcan 800 spline. I will measure exactly, but 4.9 was the samllest 14 I could get and it was way too large for my use.

I will email you tonight though and get a measurement to be extra safe.

Thanks.
Cool.
Srinath.

Scootworks · Posted: October 8, 2009, 2:18 pm Post subject: Re: Driver Footpeg Mounts?

Srinath wrote:

Anyway, 14mm is fine too but it has to be under 4 1/4-4 1/2 dia and have the marauder/vulcan 800 spline. I will measure exactly, but 4.9 was the samllest 14 I could get and it was way too large for my use.

We manufacture a 8mm pitch pulley with the Vulcan/Marauder spline pattern on a hardened A2 tool steel core insert that will accept up to a 30mm wide belt and is 4" in dia at the flange. It has a flange on both sides.

We also manufacture a 14mm pitch pulley with the Vulcan/Marauder spline pattern on a hardened A2 tool steel core insert that will accept up to a 28.5mm wide belt and is 4-3/8"" in dia at the flange. It has a single flange on the side facing outward in a typical installation.

Dave

Srinath · Posted: October 8, 2009, 3:11 pm Post subject: Re: Driver Footpeg Mounts?

Scootworks wrote:

Srinath wrote:

Anyway, 14mm is fine too but it has to be under 4 1/4-4 1/2 dia and have the marauder/vulcan 800 spline. I will measure exactly, but 4.9 was the samllest 14 I could get and it was way too large for my use.

We manufacture a 8mm pitch pulley with the Vulcan/Marauder spline pattern on a hardened A2 tool steel core insert that will accept up to a 30mm wide belt and is 4" in dia at the flange. It has a flange on both sides.

We also manufacture a 14mm pitch pulley with the Vulcan/Marauder spline pattern on a hardened A2 tool steel core insert that will accept up to a 28.5mm wide belt and is 4-3/8"" in dia at the flange. It has a single flange on the side facing outward in a typical installation.

Dave

4 and 3/8th or 4 inch should work well. By up to you mean narrower than right ?
I will get back with you by tonight. But have a price for em. Thanks.
Cool.
Srinath.

pumps · Posted: October 8, 2009, 3:28 pm Post subject: Re: Driver Footpeg Mounts?

Dave are you still going to put up a picture of one installed on an XS?

klink · Posted: October 11, 2009, 10:04 am Post subject: Re: Driver Footpeg Mounts?

Joseph wrote:

Would thes go on the location of the stock driver peg? Do you have a pic of one instaled? I don't see how they go.
Doess anyone have aftermarket pegs mounted with pics? I dont see how the repacements are instaled.
www.jcwhitney.com/FOLD...002578;0;0 How would you intall something like this to the driver peg bracket? I am curious I don't plan on purchgasing these I do like the Kuryakan better.

Those pictured pegs go on the engine crash bar if one is installed. They are cruiser type pegs to allow you to put your feet up. I have the crash bar with a set of those on it. Gonna sell along with the luggage rack I also took off.

Joseph · Full Member Joined: May 22, 2007 Posts: 767 Location: NY

Ohh ok that I could see, I just couldn't see how the jcwh.. pegs would go in stock location. If one wanted to change the stock pegs I'd guess you have to drill out the rivet and get something like a clevis end peg?

What Happened to 650rider.com?

Yamaha xs650