Search 650Rider.com and XS650.com using Google!
|
| |
|
|
xs650 > > Custom Work: Chop, Bob, Cafe and Flattracker - Streettracker > > Chopper jobs > > hardtails!!!! who does the best work? |
---|
hardtails!!!! who does the best work?
|
Author |
Message |
BiffTirkle Full Member
Joined: May 20, 2007 Posts: 193 Location: Virginia
|
Posted: May 29, 2007, 10:41 pm Post subject: hardtails!!!! who does the best work? |
|
hi, my name is Russell. i am a new 650 owner, and new to the site. i have never done any custom anything on a bike before. ive stayed pretty much with stock vintage japanese bikes. but i want to build a chopper. i went out a few days ago and bought an engine and frame, because i did not want to chop my current 650. i have no welding skills, so anything that requires welding is out of the question. i also do not want to spend a crap load of money on this project. i want it sweet and simple. so that leaves me with shipping my frame off to get hard tailed. heres the deal, i want a fun project, and eventually later ill take up to doing 100% of the work myself. but for now simple.
whats the deal?
BW choppers. quality? ive read only 2 posts that have negative things to say about them. and those were in 2005. its been 2 years, wouldnt you think they have gotten better? i do like what they offer as frame options, tank, fender, seat. sounds simple to me.
and bill at kansas kustoms, his prices are a bit more ( ill pay for quality), and he can put a tank and fender on my frame.
help?
|
|
Back to top |
|
|
ttmaniac Full Member
Joined: Dec 22, 2006 Posts: 468
|
Posted: May 29, 2007, 11:06 pm Post subject: Re: hardtails!!!! who does the best work? |
|
Hey russell....why not have someone lathe you out a couple of struts. It can sit nice n low. Cheaper than current weld on hardtails. Then you can spend the saved money on a bore kit, cam, springs, clutch, and headwork. Much funner to go fast than to look cool. Besides, I always thought going fast was looking cool!............oh yeah, like the stones say...paint it black
|
|
Back to top |
|
|
jp1979 Full Member
Joined: May 15, 2006 Posts: 31 Location: Wisconsin
|
Posted: May 30, 2007, 10:21 am Post subject: Re: hardtails!!!! who does the best work? |
|
I had BW weld my hardtail on, it turned out ok. Just the way they mount the center down tube is a little iffy. Next time I will pay more to have a real shop do the hardtail. As far as the tanks, fenders and such, you can get them cheaper off ebay that what he sells them for. BW doesnt have good communication with people either, I emailed him the same question 5 times with no answer.
_________________ JP79 |
|
Back to top |
|
|
xs1961 650Rider Supporter
Joined: Apr 23, 2007 Posts: 1808 Location: uk
|
Posted: May 30, 2007, 3:17 pm Post subject: Re: hardtails!!!! who does the best work? |
|
Try this bloke..told they're real quality ;
Troy Sheets,email sheets5 @ hotmail.com
His Ebay username is aussie284
|
|
Back to top |
|
|
choppergary New Member
Joined: Sep 12, 2005 Posts: 8
|
Posted: May 30, 2007, 7:00 pm Post subject: Re: hardtails!!!! who does the best work? |
|
Well here is my 2 cent worth... ( I have a little experiance with choppers...)
1. www.tanksbytigman.com (Dave) I own 3 of Daves Frames and have seen others and by far his frames are of the best quality
Daves frames are all out of at least 1.50" DOM and are all tig Welded
His frames run about 800.00 and come with MSO's
2. Las Vegas Kurt (702) 655-6444 Kurt build a nice frame as well for the budget builder his frames run about 400.00 and are made of 1.25" ERW and are Mig Welded (mig is not as pretty as Tig but just as strong)
3. www.bwchoppers.com (Black Widow Choppers) Jesse build a nice frame as well as they also can take you frame and hardtail it (I would recomend a complete frame as you can design it yourself, hartailing your stock frame is good but you have limitations on what the rest of the frame looks like)
4.www.cycleonemanufacturing.com These guys are out of canada and build a nice frame but it gets expensive (well over a grand)
I hope that helps..
Gary
|
|
Back to top |
|
|
choppergary New Member
Joined: Sep 12, 2005 Posts: 8
|
Posted: May 30, 2007, 7:08 pm Post subject: Re: hardtails!!!! who does the best work? |
|
Also By the way,
If your going to build a complete frame spend the few extra bucks and build it to run a 200mm wide tire rather than the stock skinny tire
All mine are wide tire choppers you should be able to see one of them them here
www.650motorcycles.com...yPoh2.html
xs650temp.proboards29....1173904118
Gary
|
|
Back to top |
|
|
choppergary New Member
Joined: Sep 12, 2005 Posts: 8
|
Posted: May 30, 2007, 7:11 pm Post subject: Re: hardtails!!!! who does the best work? |
|
Lets Try This
You can email me @ gary.poh @ rogers-strong.com if you have any questions..
Thx
Gary
Description: |
|
Filesize: |
46.4 KB |
Viewed: |
6410 Time(s) |
|
Description: |
|
Filesize: |
67.91 KB |
Viewed: |
6409 Time(s) |
|
Description: |
|
Filesize: |
83.41 KB |
Viewed: |
6412 Time(s) |
|
|
|
Back to top |
|
|
BiffTirkle Full Member
Joined: May 20, 2007 Posts: 193 Location: Virginia
|
Posted: May 30, 2007, 11:48 pm Post subject: Re: hardtails!!!! who does the best work? |
|
wow, thanks guys. this is great. i suppose i should have mentioned the type of chopper i want to build. i am in love with the classic bobber style, with a suicide shifter. my budget doesnt allow me to buy a frame. unless its near the same cost as sending mine off to hard tail. but you guys have really been a big help. if you have any more suggestions i would love to hear them. thanks!
_________________ Biff Tirkle is a fictional name. can someone tell me how to change my user name? damnit!! |
|
Back to top |
|
|
BiffTirkle Full Member
Joined: May 20, 2007 Posts: 193 Location: Virginia
|
Posted: June 10, 2007, 9:53 am Post subject: Re: hardtails!!!! who does the best work? |
|
ok, heres the update. choppergary gave me alot of info to work on. so i made my calls, sent my emails. i have decided NOT to hardtail my frame. but instead to get a frame made. Las Vegas Kurt will be making my frame. i am sure everyone who makes these frames does pretty decent work, but cost wise Las Vegas Kurt is the cheapest, and i spent quite some time on the phone with him talking about what i want, and he in turn spent time explaining to me his process. and so far i am very pleased and happy with everything we have discussed. so that is my decision. thank you for all your help!
now its on to engine and performance!
_________________ Biff Tirkle is a fictional name. can someone tell me how to change my user name? damnit!! |
|
Back to top |
|
|
xs1961 650Rider Supporter
Joined: Apr 23, 2007 Posts: 1808 Location: uk
|
Posted: June 10, 2007, 4:28 pm Post subject: Re: hardtails!!!! who does the best work? |
|
I just had this made for me by Troy Sheets & shipped to the UK...Nice job..Nice price..$240 contact sheets5 @ hotmail.com
Description: |
|
Filesize: |
29.15 KB |
Viewed: |
6337 Time(s) |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|
|
|
Check out the new Honda CB750 Forum at CB750.com! A site dedicated to the great Honda SOHC and DOHC CB750.
Check out the new Yamaha XS400 Forum at XS400.com!
Yamaha xs650
xs650, xs, 650, forum, links, chopper, custom, yamaha, parts, forum, info,
information, bb, bulletin board, XS650 650Rider, Free Unrestricted xs650
forum, Personal photo albums, Post images in Forum, News columns, Daily blog,
Links, Event calendar, Information for Yamaha XS650
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
|