keys

royfisk · Posted: December 19, 2009, 4:01 pm Post subject: keys

Does anyone know who can cut keys by switch #s ?

oldbikenut · Posted: December 19, 2009, 4:23 pm Post subject: Re: keys

What I did was call my local locksmith and gave them the number to see if they could do it and both times I needed it done they were able to so. I also had them change the seat lock to match the ignition key. I think any good locksmith can do it for you!

1ironhead · Posted: December 19, 2009, 4:25 pm Post subject: Re: keys

There's a guy on ebay.He goes by bel-ray64083.$18.50 OBO.

royfisk · Posted: December 19, 2009, 4:27 pm Post subject: Re: keys

I guess Ill pull the switch and see if I can geterdone

oldbikenut · Posted: December 19, 2009, 4:32 pm Post subject: Re: keys

royfisk wrote:

I guess Ill pull the switch and see if I can geterdone

Why pull the switch? I think I paid about $10 and they even gave me an extra key for free!

royfisk · Posted: December 20, 2009, 8:34 am Post subject: Re: keys

really, ill try that

pamcopete · Posted: December 20, 2009, 10:06 am Post subject: Re: keys

This place will cut a key from the numbers and do whatever else is needed.

www.motorcyclekeys.com

If your gas cap uses a different key than the ignition switch, you can cut one edge of the key for the ignition and the other edge for the gas cap.

You can also buy the key blanks from motorcycle keys and use a small rat tail file and make your own keys. That's what I did.

I also converted my gas cap to keyless.

You can also take the gas cap lock apart and remove all the tumblers so any key, including your ignition key, will work in the gas cap lock.

What Happened to 650rider.com?

Yamaha xs650